The Preachers

The Antminer L3 +/L3 ++ firmware was made for the safe overclocking of ASIC, and here are a few upgrades anticipating you in this model:

Capacity to overclock up to 700 Mh/s and that’s only the tip of the iceberg

Visual control of each chip (green, orange, red diodes will show you the sort of issue and the level of the end)

Prepared profiles for overclocking (select the overclocking choice as per the limit of your force supply)

These days Antminer L3++ Litecoin Miner For Sale Online is creasing rapidly.

Prepared profiles for downvote

Individual overclocking of each load up independently (overclocking and voltage) and of each chip. Such enumerating guarantees the greatest ASIC speed and stable activity of the whole framework. Programmed recurrence determination and observing of the chips in programmed mode.

Capacity to wind down fans during drenching cooling (turn off fan surveying). This permits you to lessen the degree of clamor and energy utilization. Capacity to introduce firmware + move arrangement + make laborers for a limitless number of diggers on a similar organization simultaneously, is extremely advantageous and affordable

The capacity of programmed ASIC checks for infections and malware. The program will ensure your assets and square the section of outsider projects into the framework.

Capacity for showing power utilization (wattmeter)

Quest work for ASIC

Capacity for mass secret phrase change, SSH port, and port cripple SSH

The “rest mode” works when it is turned on, the mining stops, and the fans go down to the least speed – again a chance to save money on power and diminish the clamor level. Utilizing Ant miner L3 +/L3 ++ firmware assists with expanding ASIC execution up to half.

The most well-known modes for this firmware ended up being:

505 MH/s – 650 watts

700 MH/s – 1200 watts

Firmware energy effectiveness arrives at forty percent new situation for 650 W 520 MH – 1050 W 650 MH. The programmed settings have been improved and can be custom-made to the utilization figures or the exhibition profile. Additionally, for more prominent customization of the framework, a decision of voltage and recurrence of the payload showed up naturally and physically. Damaged sheets can be restarted independently from the whole framework and not upset the mining system. The recurrence expanded to 650 MHz, yet over 500 MHz is accessible just for drenching cooling. Additionally showed up:

Fan control, debilitating fan control for drenching submersion cooling – there could be as of now not a requirement for a cooler emulator;

Defensive clock for temperature, chip misfortune, hash rate;

Equal advancement of paid mining, ceaselessly and suspending the principle mining;

Similarity with all administration and control frameworks, Programming interface.

The most effective method to streak Ant miner en masse:

We fill in the firmware in huge amounts through the BTC Instrument, filters the subnet, select ASICs and snap overhaul firmware, select the record with the firmware

Then, go to the transfer tab, select the profile you made, enter the current secret phrase from the ASICs in the field and snap save, the record will be saved money on the PC and can be disseminated to the all-around streaked ASICs utilizing the BTC Instrument (update work). Or on the other hand, you can disperse the confit utilizing the transfer work by choosing the imp range and tapping the apply button underneath, this will just influence the ASICs that are streaked with our firmware.